You
can be sure of your solenoids when you use the Sol-X
|
| 6
CHANNEL MANIFOLD
|
Fast and flexible solenoid adapter setup.
- Handles
individual solenoids as well as solenoid packs!
|
| SOLENOID
ADAPTERS |
A complete line of specific solenoid adapters and solenoid pack
plates are available. Check out our
complete line HERE!
- The
Sol-X handles all your solenoid testing needs.
|
| PRESSURE
GAUGES |
Input and output oil pressure can be accurately set and measured
for proper solenoid testing.
|
| FLOW-TEMPERATURE
|
Oil flow and oil temperature can be digitally measured.
- Helps
you sort out bad solenoids quickly.
|
| OIL
HEATER
|
Optional heated oil allows you to take advantage of the natural
detergency of transmission fluid when it is hot as well as simulate
normal operating conditions of the solenoid!
- Give
your solenoids a royal flush!
|
| MULTIMODE
CONTROLLER |
The Sol-X controller has 3 separate modes of operation:
- MANUAL
mode
provides you with manual control of the solenoid on-off
cycle.
- CYCLE
mode provides a fast on off exercising of the solenoid
-
FLUSH
Unique Flush Mode allows you to vigorously energize the
solenoid while under pressure. An excellent feature for
agitating and flushing contaminants out; thereby,
reclaiming solenoids and saving you BIG
money!!
|
| MULTIMETER
|
The Sol-X multimeter allows you to continuously electrically
evaluate the solenoid being tested.
- Find
opens, shorts, and intermittents fast!
|
| SOLENOID
DRIVE |
Eight separate driver channels are provided to allow continuity
checks of solenoid packs and harnessed solenoids.
|
| SOLENOID
POWER
|
Solenoid drives can be set up to operate either connected to
ground or connected to common positive.
|
| ON/OFF
DUTY
|
Complete duty cycling controls are provided to allow either
simple ON/OFF testing or PULSE WIDTH MODULATION (PWM) testing.
Pulse width duties are set digitally to within 1% and are very
stable and repeatable.
- Repeatability
means profit.
|
| FREQUENCY
|
You can select from 5 available operating frequencies for testing
PWM solenoids.
|
| SIZE
|
|
Bench
top design is approximately 24:H x 22"W x 23"D. Operates from
standard shop power.
|
